Metallic Epoxy Flooring in Seaside CA - a deep, glossy floor built on smooth concrete
Tired of a plain gray slab or a peeling old coating? We grind it smooth and lay down a metallic floor with real depth.
- Licensed and insured.
- Free quotes on site.
- We reply within 1 business day.
Is metallic epoxy flooring right for my concrete floor in Seaside?
The short answer: Metallic epoxy flooring in Seaside is a decorative coating we build on your concrete in layers and finish with a clear top layer. It turns a plain garage, basement or shop slab into a glossy floor with swirling color and real depth.
Most people who call about a metallic floor either have a gray slab they're tired of or an old painted floor that's starting to chip, and they want to know if their concrete can take it. Usually it can, but the price and the schedule both come down to what's under the coating: how much grinding the slab needs, whether old paint or sealer has to come off, how many cracks need filling, how big the room is and which clear topcoat you choose. Seaside Sterling Epoxy Floors is based here in Seaside and works in many cities around Monterey Bay and inland from it, and your written estimate spells all of that out for your floor.
How can you tell your floor needs work before a metallic coat?
Old coating flaking off
Paint or old sealer that lifts in patches usually never bonded well in the first place, often because nobody ground the concrete first. Waiting just means more chips underfoot, and a metallic coat laid over any of it would come up along with it, so all of it has to come off.
Oil spots that won't scrub out
Dark spots where a car has parked for years mean oil has soaked into the concrete instead of sitting on top. The longer it sits, the deeper it goes, so I need to see those spots before I can tell you how a coating will hold there.
Damp spots or white powder
A dark damp patch or a white, chalky crust on the slab usually means moisture is coming up through the concrete from the ground. A coating rolled over that can blister or peel, so have the slab checked before you put money into the finish.
How we install metallic epoxy flooring
A metallic floor shows every flaw beneath it, so the biggest part of the job is the concrete. We diamond-grind the slab smooth, take off old paint or sealer completely, and fill cracks and low spots, because metallic pigment will happily trace every patch and ridge you leave behind. Then we put the layers down in order: a primer that soaks into the concrete, a colored base coat, the metallic epoxy we work by hand to get the swirls and depth, and a clear topcoat to protect it all. We're glad to do a small sample first so you can see the look before we do the whole floor.
Metallic epoxy isn't the right floor for every room, and I'd rather tell you that up front. Where a floor gets hot water, harsh cleaners or heavy carts every day, urethane cement flooring holds up to that kind of use better than a decorative coat. If what you really want is a slick, shiny surface with no coating on top at all, polished concrete flooring gets there by working the slab itself.
Garage floors
Most of our calls are for garages, where the floor takes hot tires, dropped tools and sun coming in through an open door. The clear topcoat matters most here, so we'll talk through which one fits before you decide anything.
Basements and living spaces
Inside the house, metallic epoxy looks like a finished floor instead of a work surface, and the color shifts as the light changes. These slabs often sit right on the ground, so I check moisture closely before we plan anything.
Shops and small business floors
Shop and business owners usually want a floor that looks sharp and can still take a beating from foot traffic and rolling carts. Where a floor gets wet or oily, we can add grit to the topcoat so people keep their footing.
What happens when you call about a metallic epoxy floor in Seaside?
This is how a metallic floor goes with us, from the first call to the final walkthrough. Most of the early time goes into looking at your concrete, well before anyone mixes a coating.
- Step 01
Call and set a visit
Call (831) 204-4050 or send the form, and tell us roughly how big the floor is and what you use it for. We'll pick a time for me to come out.
- Step 02
I check the floor in person
I check the concrete for moisture and cracks and ask how you actually use the space, because a home gym and a two-car garage need different things. You get a written estimate that spells out the prep, the product and how long the floor stays out of use, so nothing about the price is left to guess.
- Step 03
We install and walk it together
On the day, we do the prep, put the floor down and then walk it with you. Before we leave, I go over how to care for it.
Metallic epoxy flooring in Seaside: permits and slab moisture
Before any building project or major repairs, the city's Building & Code Enforcement Department recommends that owners check with it to find out whether the work needs a permit. It takes applications in person at the Permits & Inspections counter in Seaside City Hall, and by email at building@ci.seaside.ca.us. Before we start, I check with the city or county building office for your address and tell you what they said, and if your job needs a permit, we handle the paperwork with you.
Most of the garage and house floors I look at around here are slabs poured right on the ground. One maker of metallic systems requires a suitable moisture barrier under slabs like that, because seasonal changes in ground moisture can push vapor up through the concrete no matter what a test showed before coating. I can't always tell from the top whether a barrier is down there, so I test the slab, ask what you know about it and tell you plainly if I think it isn't ready. We run into the same questions on jobs in Marina and Monterey.
Get a free on-site estimate for your metallic floor
We reply within one business day to set a time, then I come out to look at your floor and write up an estimate with the prep, the product and how long the floor stays out of use. The estimate is free, and there's no obligation.
Why Seaside homeowners call Seaside Sterling Epoxy Floors
I'm on your job, start to finish
I come out myself to look at the floor and give the estimate, and I'm on the job with our installers when the work gets done. The person who saw your cracks is the same one making sure they got filled right.
Prep comes before any coating
I learned this trade as a helper on grinding and coating crews, then started our business here in Seaside in 2023, and that work taught me floors usually fail because of what's under them. I'd rather tell you your slab isn't ready yet than sell you a pretty coating that starts peeling.
Licensed and insured in California
We're licensed and insured, and California's contractors board counts preparing the surface as part of a flooring contractor's work, which is exactly where we put our effort. Every floor we put down is backed by our satisfaction guarantee.
On a metallic floor, how smooth and clean the concrete is decides how good the finish looks. Tell us about your floor and I'll come out and take a look.
Metallic epoxy flooring questions from Seaside homeowners
How much does metallic epoxy flooring cost per square foot in Seaside?
On the West Coast, metallic epoxy installation usually costs about $10 to $15 per square foot. That figure comes from a national pricing guide and isn't our price, and where your floor lands depends on how much prep it needs and which topcoat you pick. Your written estimate gives you the figure for your own floor.
Will a metallic epoxy floor turn yellow in my garage?
It can if the clear coat on top is epoxy, because one pricing guide says an epoxy clear coat in a garage yellows within one summer. The same guide recommends a polyaspartic topcoat for any space that gets sun, which includes every garage, so ask which topcoat a bid includes. A polyurethane topcoat costs less than polyaspartic, but it takes longer to cure and resists wear slightly less.
How long does it take to install a metallic epoxy garage floor?
One guide puts a standard garage at 12 to 17 labor hours spread over 2 to 3 days. Much of that is prep and the wait between coats, and your estimate tells you how long your floor stays out of use.
How soon can I walk and drive on a new metallic epoxy floor?
With a polyaspartic topcoat, one guide says the floor is walkable in 4 to 6 hours and drivable in 24 to 48 hours. Plan to park in the driveway or on the street for a couple of days.
How do I know if my oil-stained garage floor can take metallic epoxy?
Have the stains looked at before you buy anything, because oil that has soaked into concrete in most cases can't be fully removed and may keep the coating from bonding. I check those spots during the estimate and tell you straight what I think they'll do to the finish.
What temperature is too hot or cold to install metallic epoxy?
One maker lists 60° to 85°F as the range for the air, the floor surface and the material for its system. Higher heat and humidity shorten the working time, so conditions on install day affect how long we have to work the metallic coat.
Other floors worth comparing with metallic epoxy
Urethane Cement Flooring
For kitchens, wash bays or shop floors where spills, dropped tools and steady abuse would rough up a decorative finish, this cement-based floor is built to take it.
Polished Concrete Flooring
If you like a glossy look but want bare concrete as the finish, this turns your existing slab into the floor with no coating on top.
Call (831) 204-4050 about your metallic floor
Tell us the floor's size, how you use it and whether it has old paint, sealer or oil stains, by phone or at office@seasideepoxyflooringandconcretepolishing.com, and I'll know what to look for when I come out.