Flooring Contractor in Marina, CA - Garage Floors Built on Sound Prep
Seaside Sterling Epoxy Floors is a flooring contractor based in Seaside that coats, polishes and repairs concrete floors in Marina, CA, from garage floors in family homes to shop floors that take daily abuse.

- Licensed and insured.
- Free quotes on site.
- We reply within 1 business day.
Marina garage and shop floors as we see them
The short answer: Yes, Seaside Sterling Epoxy Floors works in Marina. As a flooring contractor based just down the road in Seaside, CA, we put down epoxy, polyaspartic and polished concrete floors here, a lot of it in home garages, plus shops and small businesses. I come out to look at your slab myself, because the prep under the coating decides how long it lasts.
Our Marina calls run from single-story homes with one- or two-car garages to newer neighborhoods with bigger garages, townhomes with a small slab out back, and shops and small businesses that need a floor to take carts and spills. We work the same kinds of floors in Monterey and Salinas, so the jobs here are familiar ground for our crew.
A lot of Marina sits on sandy ground near the dunes, and the slabs on top of it range from fairly fresh garage floors to older concrete with oil stains, old paint and patch jobs. That range is why I look before I quote, since a newer slab may need little more than grinding while an older one can need stripping and crack repair first.
What Marina garages and shop floors put up with
In a lot of Marina homes the garage does double duty as a workshop, a home gym and the place the beach gear lands, sand and all. Bare concrete takes that badly, since it soaks up oil, sheds dust and stains where the tires sit, so we seal it under a coating you can sweep and mop.
The other thing we run into is a floor somebody already tried to fix. Older slabs here often carry a coat of hardware-store paint or sealer that's flaking, and a new coating laid over that comes up right along with it. I learned that one early as a helper, scraping up a peeling garage floor on my hands and knees, so we strip and grind back to bare, clean concrete first and only coat once the slab is actually ready.
Flooring services we offer in Marina
Epoxy Floor Coatings
For a Marina garage, laundry room or workshop that needs a tough, easy-to-clean surface, we grind the slab and lay down epoxy in the color you pick.
Commercial & Industrial Epoxy Floor Coatings
When a shop, warehouse or small business floor in Marina takes carts, forklifts and spills all day, we put down heavier coating systems built for that traffic.
Garage Floor Coatings
It's what we're best known for, turning a garage floor with oil stains, dust or peeling paint into a sealed floor you can sweep clean.
Polyaspartic Floor Coatings
If you want the garage back in use sooner, a polyaspartic coating is a faster-curing option we can lay over a properly ground Marina slab.
Metallic Epoxy Flooring
For a Marina showroom, studio or living space where you want a floor with depth and swirl, metallic epoxy gives a poured, one-of-a-kind look over concrete.
Urethane Cement Flooring
For Marina restaurant kitchens, food prep rooms and spaces with hot washdowns and heavy spills, urethane cement holds up where thinner coatings can fail.
Polished Concrete Flooring
When the slab itself is in good shape, we grind and polish it to a glossy finish that skips the coating, which suits shops and open floor plans.
Stained Concrete Flooring
Stained concrete adds color right into the surface of an existing slab, a good fit for a Marina patio, entry or family room you'd rather not cover up.
Terrazzo Flooring
For a lobby, storefront or entry that needs to wear well for years, terrazzo sets chips of stone or glass into a ground, polished floor.
Basement Flooring
When you have a basement or a lower-level room on a slab, we test the concrete for moisture first and choose a floor that suits what we find.
Concrete Grinding & Surface Preparation
This is the part nobody sees and the part that matters most, grinding a Marina slab down to clean, open concrete so the coating actually grabs.
Concrete Sealing
A clear sealer keeps bare driveways, patios and garage floors from soaking up oil and water, and it's a lower-cost step when you don't need a full coating.
Concrete Resurfacing & Overlays
When a slab is worn, pitted or patched but still solid underneath, an overlay puts a new surface on top instead of tearing the concrete out.
Self-Leveling Concrete & Overlays
Uneven or sloped slabs in older Marina homes and shops can be brought flat with self-leveling material, a pourable layer that settles itself level before flooring goes down.
Pool Deck Coatings & Resurfacing
A Marina pool deck that's cracked, slick or hot underfoot can get a textured coating or resurfacing that's more comfortable to walk on barefoot.
Concrete Floor Stripping & Removal
Before anything new goes down, we strip old paint, failing epoxy, glue or tile, because a new floor is only as good as what's under it.
Get a free on-site estimate for your Marina floor
Send the form and we'll reply within one business day to set up a free on-site estimate at your Marina home or shop, with no obligation. I come out myself to look at the floor, and afterward you get a written estimate to think over. We're licensed and insured, and our work is backed by our satisfaction guarantee.
Working in Marina: permits, licenses and what moves the price
Building permits in Marina come from the city's Building Division, which also does the plan reviews and inspections. Its permit list names work like new construction, ADUs, which are backyard or garage living units, and kitchen or bath remodels, but not floor coatings, so before we start I check with the division and tell you what they said, and if your job needs a permit we handle the paperwork with you. If one is needed, the start date waits on the city. The city also requires a contractor to hold a City of Marina business license before it issues a permit, so it's fair to ask any contractor you're weighing whether they have one.
The price here mostly follows the slab and the finish you pick, and the schedule mostly follows the prep, which your written estimate spells out. Marina is a short drive up from our base, and we do the same work in Seaside and Castroville, so getting a crew and a grinder out to you is easy to plan.
How it works when you call us about a Marina floor
Here's how a job goes from your first call to a finished floor. I'm there at the start to look at the slab and there again when our installers do the work.
- Step 01
Call or send the form
Call (831) 204-4050 or send the form and tell me a little about the floor and how you use it. We'll pick a time for me to come out, and it helps if you can be there.
- Step 02
I check your slab in person
I come out myself, check the concrete for moisture and cracks, and ask how you actually use the space. You get a written estimate that spells out the prep, the product and how long the floor stays out of use, so you know what you're paying for.
- Step 03
We set a start date
Once the permit question is settled, we pick a day that works for you. If your job has a city inspection, the city books those Monday through Friday by appointment at least 24 hours ahead, in a morning window of 8 to 12 or an afternoon window of 1 to 4 rather than a set time, so we plan our days around it.
- Step 04
We prep, install and walk it
On the day, we prep the slab and put the floor down, and I'm on the job with our installers. When it's done, we walk the floor with you and go over how to care for it.
Marina floor questions we hear at estimates
How much does an epoxy garage floor cost in Marina?
The cost of an epoxy garage floor in Marina comes down mostly to your slab's size and condition, so I give you a figure after I've seen it. Cracks to repair, old paint or failing coatings to strip, and moisture in the concrete all add prep, and a decorative flake or metallic finish takes more steps than a plain coat or a clear sealer. Your written estimate breaks out the prep and the product so you can see where the money goes.
What plans do I need for a building permit in Marina?
Most building permits in Marina need a plot plan drawn to scale, a foundation plan, a floor plan, exterior elevations and framing details, all submitted online through the city's permit portal. That plan set is aimed at building work, so it mostly comes into play when your new floor is part of a kitchen or bath remodel or an ADU. The city's building permits page is where you'd start that application.
How long is a building permit good for in Marina?
A Marina building permit expires if the project hasn't passed one of its required inspections within one year, and an expired permit is void. So if your floor is tied to a permitted remodel, keep the inspections moving instead of letting the job sit.
Do earthquakes crack garage floors in Marina?
They can, and Marina sits in a very active seismic area, so hairline cracks in garage slabs are something I expect to see here. We clean out and fill cracks before any coating goes on, because a coating over an open crack just shows the crack. If a crack is still moving, I'll tell you so, since no coating can stop a slab from shifting.
What causes an epoxy garage floor to peel?
Most peeling comes from what's under the coating, usually a slab that wasn't ground, still had oil or old paint on it, or had moisture coming up through it. That's why I test for moisture and we grind down to clean concrete before anything goes on. I'd rather tell you your slab isn't ready yet than put down a pretty coating that lets go.
How do I get my garage ready for a floor coating in Marina?
Clear everything off the floor, including shelves, bikes and storage bins, because we need the whole slab open to grind it edge to edge. You don't need to scrub off oil stains or old paint, since stripping and grinding is our part of the job. I'll go over anything else your floor needs when I come out to look at it.
Book your Marina floor estimate today
Our phones are open evenings and weekends, so call (831) 204-4050 after work or send the form whenever it suits you.




