Flooring Contractor in Castroville, CA - Garage and Shop Floors Built on Solid Prep
Seaside Sterling Epoxy Floors is a flooring contractor serving Castroville, CA. We grind, coat, polish and seal concrete floors in garages, shops, basements and on pool decks, and we grind the slab clean before anything goes on it.

- Licensed and insured.
- Free quotes on site.
- We reply within 1 business day.
Castroville concrete floors, from garages to farm shops
The short answer: Seaside Sterling Epoxy Floors is a flooring contractor that coats, polishes and repairs concrete floors in Castroville, CA. Most of what I'm asked to look at here is a garage slab, a shop or a small business floor that has to hold up to real work, and the answer usually starts with the prep.
Castroville is a working place, and the floors show it. We see older garages carrying a few owners' worth of oil, paint and patching, shops and sheds tied to the farms around it, and family homes where the garage doubles as a workshop or a gym. It's the same mix we meet up in Watsonville and inland in Prunedale, so the jobs here feel familiar.
Tembladero Slough runs along the southwest edge of Castroville, and on low, damp ground a slab can hold more moisture than it shows on top. That's why I test the concrete before I recommend anything, because a coating over a wet slab is the fastest way I know to watch money peel.
Castroville floors take damp air and hard use
This close to the bay, a lot of slabs sit in damp air much of the year, and concrete works more like a hard sponge than a sealed plate, so moisture keeps moving up through it from the ground. Put a coating down before you know how much is coming through and it can blister or let go in patches. We check every slab with a moisture test, and if the reading isn't right, I'll tell you to wait or we'll use a system made for damp concrete.
The other thing is how hard these floors work. Garages and shops here hold work trucks, equipment and the odd tractor part, and oil soaked into old concrete will push a new coating right off, so we grind until we're past the stains and into clean concrete. That's the part nobody sees, and it's the part I care about most.
Flooring services we offer in Castroville
Epoxy Floor Coatings
A good fit when a bare garage or shop slab is dusty and stained, and you want a tough, wipeable floor over concrete we've ground clean first.
Commercial & Industrial Epoxy Floor Coatings
For Castroville shops, ag buildings and small businesses where forklifts, pallet jacks and spills would chew through a thin coating, we build a heavier system on prepped concrete.
Garage Floor Coatings
What we're best known for. We grind off the old paint and oil, fill the cracks, then coat it so tires, tools and drips clean up with a mop.
Polyaspartic Floor Coatings
When you want the garage back sooner, a polyaspartic coating cures faster than standard epoxy and holds its color better with the door open to the sun.
Metallic Epoxy Flooring
For a living space, studio or showroom where you want a swirled, glossy look instead of flakes. It shows every flaw underneath, so the prep matters twice as much.
Urethane Cement Flooring
Built for kitchens, food processing rooms and wash-down areas where hot water, harsh cleaners and steady moisture would lift an ordinary epoxy right off the slab.
Polished Concrete Flooring
If your slab is sound and you'd rather skip a coating, we grind and polish the concrete itself to a hard, easy-to-sweep shine with nothing on top to peel.
Stained Concrete Flooring
Adds color to plain gray concrete on patios, interior slabs and shop offices by soaking into the surface, then we seal it so it wears in instead of chipping.
Terrazzo Flooring
For an entry, lobby or business floor meant to stay in service a long time, terrazzo sets chips of stone or glass in a binder and grinds them smooth.
Basement Flooring
Below-grade slabs pull moisture from the ground, so we test before choosing anything and pick a system that can live with what that slab sends up.
Concrete Grinding & Surface Preparation
The step under every floor we do. Grinding opens up the concrete so a coating can bite in, and it takes off old sealers and glue that would block it.
Concrete Sealing
A lighter choice for a garage, patio or shop slab that just needs protection from oil, water and stains without the cost of a full coating system.
Concrete Resurfacing & Overlays
When a slab is pitted, flaking or patched in five different places, an overlay gives you a fresh, even surface without tearing out the old concrete.
Self-Leveling Concrete & Overlays
For floors that dip or slope where they shouldn't, a self-leveling compound flows out flat so tile, vinyl or a coating can go down on top.
Pool Deck Coatings & Resurfacing
Pool decks take sun, chlorine and bare feet, so we repair the cracks and lay down a textured coating that gives wet feet something to grip.
Concrete Floor Stripping & Removal
Old paint, failed epoxy or tile glue has to come off before anything new goes down, and we strip it back to bare concrete with our grinders.
Get a free on-site estimate for your Castroville floor
Send the form and we'll reply within one business day to set a time for me to come out to Castroville and look at the floor myself. The estimate is free and done on site, and there's no obligation to go ahead.
Working in Castroville: permits, licenses and what sets the price
If your property is in an unincorporated part of Monterey County inside the Coastal Zone, the county's coastal permit rules decide whether your project needs a coastal permit, and the county's Planning and Building Inspection Department is the office that reviews plans and makes that call. That answer is the first thing that can move a start date, so before we start, we check with the county building office and tell you what they said, and if the job needs a permit, we handle the paperwork with you. If you're comparing contractors, the state license rules are in the questions below.
What moves the price here is mostly the slab. Its size, how much old paint or oil has to come off, how many cracks need filling and what the moisture test says all count, along with the system you pick. The schedule turns on that same test, any permit answer and how long the floor has to cure, and I'll put your own figures in the estimate. Castroville is a short drive up the coast from us, past Marina, and we're just as often over in Salinas working on the same kinds of garages and shops.
What to expect when you hire us in Castroville
From the first call to the final walk-through, here's how a Castroville floor job goes with us, and when it helps to have you home.
- Step 01
Call us or send the form
Call (831) 204-4050 or send the form, and we'll set a time for me to come out. It helps if you're there so we can talk through the space together.
- Step 02
I check your slab in person
I test the concrete for moisture, look over the cracks and ask how you actually use the space, because a two-car garage and an equipment shop need different floors. You then get a written estimate that spells out the prep, the product and how long the floor stays out of use, so there's nothing to guess at.
- Step 03
We check with the county first
Before any work, we ask the county building office whether your job needs a permit and pass along what they said. If a coastal permit is required, the county issues building permits 10 days after it mails notice that the coastal permit was granted, and they wait longer if the decision is appealed.
- Step 04
We prep, coat and walk it
On the day, I'm on the job with our installers while we grind, repair and put the floor down. When it's done, we walk it with you and go over how to care for it.
Castroville flooring questions we hear most
Does coating a garage floor in Castroville need a coastal permit?
It can, depending on where your property sits, because the county's coastal permit covers development in its unincorporated Coastal Zone unless the work is exempt. Maintenance and alterations to an existing single-family home are on the exempt list, and so are garages, decks and workshops that aren't living space, up to a set size, but an exemption doesn't cancel any other permit the job needs. The rules are stricter for lots between the sea and the first public road, near a beach, along a scenic road corridor or near a coastal bluff, so we check before we start and tell you what the county said.
Does a flooring contractor need a California state license?
Yes, in most cases, because California requires a license from the Contractors State License Board when the job needs a building permit, uses employees, or totals $1,000 or more in labor and materials. A home improvement business also has to be licensed before it bids on your job. We're licensed and insured, and you're welcome to ask about it when I come out.
How much does an epoxy garage floor cost in Castroville?
Your price is set mostly by the prep your slab needs, so I quote it after I've seen the floor. A clean, sound slab costs less to coat than one with old paint to strip, cracks to fill or moisture that calls for a special primer. Your choices count too, since a full flake or metallic system costs more than a clear sealer, and a fast-curing polyaspartic usually costs more than standard epoxy.
Can you put down an epoxy floor during Castroville's rainy season?
Yes for most indoor garage and shop floors, though the wet months change how we plan. In Monterey County most of the rain falls between October and April, with little to none in summer, so outdoor work like a pool deck usually fits best in the dry stretch. Indoors, wet weather can push more moisture up through a slab, so I test it first and we wait if the reading isn't right.
What causes epoxy to peel off a garage floor?
Peeling almost always comes from what's under the coating, not the coating itself. Oil soaked into the concrete, an old sealer left on top, a slab that was never ground, or moisture pushing up from damp ground will all keep epoxy from gripping. That's why we grind every floor down to clean, open concrete and test for moisture first, and I'll tell you straight if your slab isn't ready yet.
How long before I can drive on a new garage floor?
It depends on the product, and I'll tell you the timeline for your floor when I quote it. A fast-curing polyaspartic gets you back on the floor sooner than standard epoxy, which needs longer to harden before tires go on it. Cool, damp weather near the bay can slow a cure, and I'd rather you park outside a little longer than have hot tires lift a soft coating.
Get your Castroville floor looked at
Our phone hours at (831) 204-4050 run until 11 PM on weeknights and 9 PM on weekends, or you can use the form, and I'll tell you honestly whether your slab is ready for a coating or needs work first.




